Rustic Platform Bed Plans
Platform bed plans – A platform bed made of log posts is a match perfect for hunting cottages or similar spots. The poles produce a rustic appearance that contributes the environment, and the design of the platform is one of the easiest to assemble. Leave two or three hours for each bed you want to build. Lay two of the longest poles parallel to each other in the position where you want the finished bed to be. Two laymen from the perpendicular to shorter log posts, with their nesting notches with notches on the longer posts. This process will remind you of some of playing with Lincoln Log toys. Drive a 3-inch nail into each visible notch, hammer the nail down through both poles to hold them in place.
Platform bed plans, add two longer posts above the existing posts. Add two shorter poles above the existing short poles. Nail in place. Repeat steps three and four to add a third layer of canes. Place the plywood sheet in position so that it is on the ridges of the narrow posts. Depending on the exact diameter of the poles they vary often, you may need to cut a shallow notch at the top of the poles. Use your power saw.
Nail the wood into place using a line of five evenly spaced 1-inch nails along each long side of the plywood. Nails through plywood and in the low register. This will serve as a platform for your mattress. Repeat steps three and four one end time each, add one more between your frames. Place your mattress in place and enjoy your rustic platform bed plans. These specifications are for a twin mattress. Increase the dimensions of wood to build for a full size mattress. Do not use these plans for king or queen mattresses, which require central support that lacks this design.